2003 speedslider 67

[eric]

Hi ,

I have recently bought this sailboard and need some advice on how the different mast foot fix position (in board or outboard) works and under what wind / choppy condition should I change it.

Thanks
eric

[Unregistered]

Hi Eric,

Sorry I have no answers for you -- I also just purchased an '03 SS 67 and have the same questions. Almost got to sail it yesterday, but it started to snow before I could get to the lake...yes, I am eager to sail it :-)

On a similar topic, has anyone tried a larger fin to extend the range of the board? The stock fin looks a bit small for east-coast lake sailing with a 7.5. I'm thinking of a Curtis Carve 7 40cm, or SR6-b 42cm. Sound good? Any other suggestions?

Charles

[Jérôme W]

I had this board, but it is mainly my wife who used it.
She (1.75 60kg) used the SS67 with a 6.3 7.5 and even a 8.5.
For me much
heavier (1.75 95kg) I used it with our 6.3 and 7.5.
We changed the fin for a select SuperFast 42 (My wife sometimes used the one provide with the board in windy sitution).
This board is fast and easy to ride, the upwind is not very goodt. but it planes early, jibe easily and go fast.
Its construction is quite light and very strong.
A+

[Steve]

Hi Eric and Charles:

Glad you guys both got Speed Slider 67's. This is an awesome board and I know you will love it. You can definitely increase the lightwind range of the board by increasing fin size to a fin in the 42 cm range.

Mast base position is a complicated issue as there are many factors involved. To start out with by moving the mast base back it will make the fin seem bigger and forward will make it seem smaller. In choppy water and stronger wind a more forward position is desirable for increased control. Boom height will also alter the equation. By lowering the boom it will make the board stick to the water by raising the boom it will free the board up. The mast placement is also affected by fin size a larger fin will require a slightly further forward mast position. The best way to find the ideal spot is to start out with the base in the middle and make small adjustments till everything feels in balance.

Best Regards:
Steve